I have a 1996 Manual Subaru Legacy Wagon my Shifter is extremely loose and i need to fix it. Not only is it hard to shift but i am learning Standard and it very hard with a loose shifter. Any help would be Greatly appreciated.
My shifter is loose as in there is a lot of play when its in gear as if its in neutral.
What do you mean by "loose"? That there’s a lot of slop in the action and it sometimes grinds or sticks when changing gears? You could need a clutch adjustment, or you might have worn or damaged synchronization rings in your shift mechanism, which I think is very likely.
-
Archives
- May 2012
- March 2012
- February 2012
- January 2012
- December 2011
- November 2011
- October 2011
- September 2011
- August 2011
- February 2011
- January 2011
- December 2010
- November 2010
- October 2010
- April 2010
- March 2010
- February 2010
- January 2010
- December 2009
- November 2009
- October 2009
- September 2009
- August 2009
- July 2009
- June 2009
-
Meta
What do you mean by "loose"? That there’s a lot of slop in the action and it sometimes grinds or sticks when changing gears? You could need a clutch adjustment, or you might have worn or damaged synchronization rings in your shift mechanism, which I think is very likely.
References :